TX Box manuals
The manuals for the TX box can be accessed and downloaded via the hyperlinks below. Technical (hardware) Manual User (software) Manual
Configuring Multi-Stage Compressors
In "Device Settings", in "Edit" do the following: A. Under "Sensor Configuration - Multi Stage": i. To enable TWO-STAGE Dashboard: "Enable Stage 1 Sensors" and "Enable Stage 2 Sensors". ii. To enable THREE-STAGE Dashboard: "Enable Stage 1 Sensors", ...
Readings on the dials: 'No data' VS '0' what is the difference?
Various data is displayed in Aircloud via dials. Sometimes a dial shows 'no data', but in other situations it shows a value of '0'. What is the difference between the two? VS Before explaining this difference. It is helpful to understand how an ...
How to access or display the AIR-TAG dashboard via a LAN connection
General The AIR-TAG displays or visualizes it's data via a dashboard. When the monitoring solution is connected to the cloud, (via an Airmatics gateway) the dashboard can be accessed by logging into the Aircloud platform ...
What do the compressor status symbols on the system dashboard mean?
The chart below explains what the various compressor status symbols mean. The input for the READY, RUN, LOAD, and ALARM signals can come from a few places depending on how the compressor interface is set up: If the compressor is connected via ...