Event count mode settings
The purpose of this feature is to allow events to be displayed as a cumulative number, rather than separate events. Imagine you have an event that is triggered many times over a short period of time. This event will fill up the event log. If you are subscribed to receive e-mails for the event, you might be receiving a lot e-mails, which is not desirable. The event count mode allows you to choose to display an event only once, but now including a count of how many times the event has occurred.
You can decide how often you receive this counted event (update). You can choose how quick an event has be converted into counted mode (Enable). You can also choose how long it may take before it is converted back into a regular event (Disable). When enabling this feature, the switching between a "regular" event and a "counted" event happens automatically, based on the configured parameters. The units for all the before mentioned parameters are in minutes.
You can decide how often you receive this counted event (update). You can choose how quick an event has be converted into counted mode (Enable). You can also choose how long it may take before it is converted back into a regular event (Disable). When enabling this feature, the switching between a "regular" event and a "counted" event happens automatically, based on the configured parameters. The units for all the before mentioned parameters are in minutes.
- Enable: Activate 'Event count mode' if an event occurs more than once within the inserted amount of minutes.
- E.g. inserted value is 10 minutes.
- When an event happens twice within 10 minutes, the mode for this event will change into 'count mode'.
- Disable: Deactivate the 'Event count mode' if the event has not occurred within the inserted amount of minutes.
- E.g. inserted value is 10 minutes.
- When an event does not occur within 10 minutes, the mode for this event will revert back to 'regular mode'.
- Update: Generate the 'counted event' for every amount of minutes inserted.
- E.g. inserted value is 10 minutes.
- An event will be generated every 10 minutes, displayed the cumulative value of how many times that event has occurred, in those 10 minutes.
Related Articles
How to subscribe and unsubscribe for event triggered e-mail notifications
How to subscribe or unsubscribe for an e-mail when an event occurs is described below. NOTE: If you are the admin user for a specific site, then you now have the option of modifying these setting for all users within your tenant. Every non-admin user ...How can I adjust my “Alert settings”?
Q: How can I adjust my alert settings for the pressure and temperature readings on the Aircloud? A: You can only adjust these settings when you have a ADMIN account. By following the steps described below you will be ...Understanding the "Measurement Data" Report on Aircloud
To generate a measurement data report go to "Show Menu" > "Reports" > "Measurement data" Fill in all of the required fields on the subsequent screen (shown below): When selecting "Type of device" you may choose "device" to generate a report for all ...Asset health page
Airtag Health Page Introduction: The purpose of this article is to serve as an all-inclusive resource for understanding the features and information that are available through the Airmatics dashboard, specifically the 'Health' page. Each part of this ...How can I adjust my “Service Timers”?
Q: How can I adjust my service counters on the Aircloud? A: You can only adjust these settings when you have a ADMIN account. By following the steps described below you will be able to change the “alert settings” 1) Go to the Aircloud ...