No or low current reading from one, two or all three current sensors

No or low current reading from one, two or all three current sensors

  1. Check the current sensor body halves are aligned and securely clipped together correctly
  2. Ensure current sensor connection to the TAG is correct and secure; ensure current sensor wire orientation is correct
  3. Ensure all current sensor orientation 'arrows' are facing the same way

    • Related Articles

    • No voltage on one, two or all three phases

      Check the main power supply to the asset; the TAG / Gateway may be operating from a separate auxiliary power supply Check the TAG voltage monitoring cable in-line fuse(s)

    • Custom Graphs - How to plot two parameters on one graph

      The custom graphing feature allows you to plot multiple parameters on one graph. You’ll find there’s no longer a need to scroll back and forth between two graphs – you can simply plot them together. Take this graph comparing Pressure and Power In for ...

    • Where does the power reading on Aircloud come from?

      The displayed power (kW) is a calculated value. The AirTag uses, inter alia, the measured current and voltage to determine this value. The kw calculation is done by the AirTag before sending the data to the cloud. In other words, the Aircloud ...

    • A reading, coming from a sensor connected to an analog input signal is missing. What can I do?

      This article assumes that there is an already correct cellular/internet connection. If there is no valid cloud connection, please consult this article. If a correct current signal is applied to the input, it should result in a value displayed on its ...

    • No variable speed frequency reading

      Check the current sensor body halves are aligned and securely clipped together correctly Ensure current sensor connection to the TAG is correct and secure; ensure current sensorwire orientation is correct