No variable speed frequency reading
- Check the current sensor body halves are aligned and securely clipped together correctly
- Ensure current sensor connection to the TAG is correct and secure; ensure current sensorwire orientation is correct
Related Articles
Where does the power reading on Aircloud come from?
The displayed power (kW) is a calculated value. The AirTag uses, inter alia, the measured current and voltage to determine this value. The kw calculation is done by the AirTag before sending the data to the cloud. In other words, the Aircloud ...
Electromagnetic Interference
Electromagnetic interference from high voltage cables,switch gear and high frequency switching components, in particular variable speed/frequency drives (VSD / VFD), can disrupt the operation of electronic equipment. Care should betaken when locating ...
Electromagnetic Interference
Electromagnetic interference from high voltage cables,switch gear and high frequency switching components, in particular variable speed/frequency drives (VSD / VFD), can disrupt the operation of electronic equipment. Care should betaken when locating ...
No or low current reading from one, two or all three current sensors
Check the current sensor body halves are aligned and securely clipped together correctly Ensure current sensor connection to the TAG is correct and secure; ensure current sensor wire orientation is correct Ensure all current sensor orientation ...
A reading, coming from a sensor connected to an analog input signal is missing. What can I do?
This article assumes that there is an already correct cellular/internet connection. If there is no valid cloud connection, please consult this article. If a correct current signal is applied to the input, it should result in a value displayed on its ...