No voltage on one, two or all three phases
- Check the main power supply to the asset; the TAG / Gateway may be operating from a separate auxiliary power supply
- Check the TAG voltage monitoring cable in-line fuse(s)
Related Articles
Custom Graphs - How to plot two parameters on one graph
The custom graphing feature allows you to plot multiple parameters on one graph. You’ll find there’s no longer a need to scroll back and forth between two graphs – you can simply plot them together. Take this graph comparing Pressure and Power In for ...
No or low current reading from one, two or all three current sensors
Check the current sensor body halves are aligned and securely clipped together correctly Ensure current sensor connection to the TAG is correct and secure; ensure current sensor wire orientation is correct Ensure all current sensor orientation ...
Asset health page
Airtag Health Page Introduction: The purpose of this article is to serve as an all-inclusive resource for understanding the features and information that are available through the Airmatics dashboard, specifically the 'Health' page. Each part of this ...
Airmatics measurement methods and data sampling rate explained
The purpose of this article is to explain how an Airmatics device samples data. This will include how often the Airtag takes a measurement, what it does with this measurement internally, and how often it sends this data to the cloud. Practically ...
Configuring Multi-Stage Compressors
In "Device Settings", in "Edit" do the following: A. Under "Sensor Configuration - Multi Stage": i. To enable TWO-STAGE Dashboard: "Enable Stage 1 Sensors" and "Enable Stage 2 Sensors". ii. To enable THREE-STAGE Dashboard: "Enable Stage 1 Sensors", ...