RS485 Data Communication Cable
RS485 data communication cable assembly with earth, 3m, 3 pin (pitch 3.81mm) to RJ45 & Set of 4 alternative connectors (to replace RJ45 as appropriate)
KB note:
The RS485 Data Communication Cable is available for purchase.
The sale of individual kit component parts is NOT supported
The supply of 'other' connector types is not supported but can be sourced separately (observe the PIN assignment diagram contained within the attached when making alterations)
Related Articles
No data communication between asset controller and an AIR-TAG.
It is possible for an AIR-TAG to obtain data from a compressor via a serial connection (RS485, Airbus485 protocol or ModbusRTU protocol). If your AIR-TAG is set-up for a data communication, but there is no data being displayed on the Aircloud ...When the AirTag loses communication with the cloud is the data displayed on Aircloud still accurate?
Accuracy of data when communication with the cloud is lost: When the AirTag detects no communication with the cloud it will save the data samples locally. The processing of data is still as accurate as if it were to be connected to the cloud. In ...Gateway 24vDC power supply cable
Power supply cabled used to distribute 24v DC power from TAG module to Gateway KB note: The cable and it's terminals is suitable for use with TAG modules & Gateway's supplied by Airmatics Terminal compatibility with 'other' Gateway products is NOT ...No Cellular / internet connectivity. No data is being displayed in Aircloud. AirTag is offline.
This article describes which connectivity issues can occur, how they manifest themselves in practice, how they can be identified and investigated, and finally, what steps can be taken to resolve the problem. Description of the experienced issue No ...Ethernet Network Cable Types - Information Sheet
In this Information Sheet you can find a guideline to see which Ethernet Network Cable is suitable for your application. Click here for the Information Sheet.