How to fill in the identification of the compressor?

How to fill in the identification of the compressor?

Q:        How can I fill in my settings for my compressor on the Aircloud?

A:        You can only adjust these settings when you have a ADMIN account.

           By following the steps described below you will be able to change the “Identifications” of the compressor.



1)    Go to the Aircloud platform and login.

2)    Open the menu in the top left

3)    In the menu table you choose for the option “Device”.


      


4)    On this page you need to find your device, the one you want to configure.

       You can search your device by using the “device name” or by using the “external ID”.

5)    When you have found the device, press the “edit” icon.





FYI: To understand the function and meaning of all the symbols, refer to this article.


6)    This is the page that will pop-up.

       Choose for the option “Identification” when you want to fill in the information of the Compressor.




These are the details you need to complete.

-    Compressor Name.

-    Compressor Brand.

-    Compressor Model.

-    Compressor Type, you have 2 options:

      -    Rotary screw
      -   Rotary Vane

-    Rated Pressure.

-    Compressor Regulation Type, you have 2 options:

      -    Fix Speed Load/offload                                                                   
      -    Variable speed

-    Compressor Cooling Type, you have 2 options:

      -    Air                                                                
      -    Water

-    Year Manufactured.


7)    When the Compressor identifications have been filled in or modified, don’t forget to save the settings.

       Press the save button which is located in the upper right corner of your screen.


FYI: To understand the function and meaning of all the compressor Info options, please read the following article.



    • Related Articles

    • How can I adjust/set my “Performance” of the compressor?

      Q:           How can I adjust or set my Performance for my compressor on the Aircloud? A:           You can only adjust these settings when you have an ADMIN account.                By following the steps described below you will be able to change ...

    • What do the compressor status symbols on the system dashboard mean?

      The chart below explains what the various compressor status symbols mean. The input for the READY, RUN, LOAD, and ALARM signals can come from a few places depending on how the compressor interface is set up: If the compressor is connected via ...

    • After successfully installing the AIR-TAG how can I view it online?

      Typically AIR-TAG's are configured before fulfillment so you'll likely already have a login and password from where you'll be able to find the AIR-TAG in question.  Simply navigate to the AIRCLOUD login page, LOGIN and use the search tools to ...

    • How can I adjust my “Service Timers”?

      Q:    How can I adjust my service counters on the Aircloud? A:    You can only adjust these settings when you have a ADMIN account.        By following the steps described below you will be able to change the “alert settings” 1)    Go to the Aircloud ...

    • Compressor controllers that Airtag can establish a data link with

      Brand Controller Note Palatek Q1, S1 IR SE interconnect X-IRI gateway between Airtag and the SE controller. DIP switches on the gateway must be correct for address (1), baudrate (9600), and stopbit (1) XE90 (oil free two stage) XE90 (R series, 1 ...